Kongsberg Seatex RADius 1000, Техническое описание

Страница: 24 / 26

Kongsberg Seatex RADius Technical description, rev 0
14
Two different transponder types are available; see detailed description in the chapters below.
One RADius 500 transponder is supplied with the RADius 1000 system. This is primarily
meant to be used as a reference transponder for system calibration and check of the IU and
PU during the system installation and commissioning. It can also be placed at a suitable
location of user choice, thus making the system autonomous. The supplied transponder is
always set to TID 150.
Figure 13 Recommended transponder placement on a production vessel
For more information on transponder placement, refer to the installation manual.
3.3.3.1 RADius 600 High Gain Transponder
The RADius 600 transponders are typically installed on platforms or other floating
installations.
•
High precision range of 200 metres.
•
Operating sector: 90 degrees horizontally and vertically.
3.3.3.2 RADius 500 Low Power Transponder
The RADius 500 transponders are easily relocated as there is no cable connection.
•
High precision range of 100 metres.
•
Operating sector: 90 degrees horizontally and vertically.
•
Powered by an internal 3.6 VDC battery. Estimated battery life is one year. Rental
units are available when battery replacement is required.
•
ON/OFF switching by removing the connector cover and inserting the activate
connector. The transponder is powered ON when the connector is inserted.
TID: 160
TID: 170
TID: 180
TID: 170 TID: 160 TID: 180
TID: 200
TID: 220