Kongsberg Seatex RADius 1000, Техническое описание

Страница: 13 / 26

Seatex RADius 1000 Technical Description, rev. 0 Health, Environment and Safety
3
2. HEALTH, ENVIRONMENT AND SAFETY
Operation or troubleshooting of RADius equipment will not imply any risk for high voltages,
explosions or exposure to gas. The RADius 1000 complies with IEC 60950/EN60950
standards regarding product safety (low voltage) and IEC 60945/EN60945 standards on
electromagnetic compatibility (immunity/radiation) and vibration.
WARNING!
The RADius 500 contains a lithium battery inside the equipment
housing. The battery is completely covered by the transponder
housing and is watertight. Unless severe damage is made to the
housing there is no risk of explosion or fire.
To avoid possible fire, explosion, leakage or burn hazard do not
open the sealed unit. Do not attempt to recharge, disassemble,
heat above +75
°
C/167 F or incinerate.
Caution! The RADius 500 battery cannot be recharged and an attempt to do so
could result in a hazard. (Battery terminals are not accessible unless the
cover is destroyed or removed).
Note! RF Exposure: The RADius must be mounted with a separation
distance of at least 20 cm from any humans.
Disposal
All RADius electrical and electronic components have to be disposed separately from the
municipal waste stream via designated collection facilities appointed by the government or
local authorities. The correct disposal and separate collection of your old appliance will help
preventing potential negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic equipment. For more
detailed information about disposal of your old appliance, please contact your local
authorities or waste disposal service.
Until further notice is given regarding reuse, disassembly or disposal, the equipment at end-
of-life, could be returned to Kongsberg Seatex AS if there is no local WEEE collection.
The equipment is marked with the following pictogram.