Kongsberg Flexview, Справочное руководство

Страница: 131 / 160

922-20207001/1.0
129
Zoom windows, page 129
Tape Measure, page 130
Protractor, page 131
String Measure, page 131
Text Label, page 131
Reference cursors, page 132
Image Quality Analysis System, page 132
Save image with or without overlays, page 133
TVG Setup dialog box, page 134
Filters, page 137
Arrow
Click to use the default arrow cursor. With the default cursor you can select and
manipulate objects on the screen.
If you are currently using one of the tools, such as the
Tape Measure
for example,
clicking the
Arrow
button will cancel the current tool.
To move overlays around in the sonar view, click the
Arrow
button, then click and
hold the left mouse button on an overlay. Drag it to where you want it then release
the mouse button.
Wiper
Removes items from the sonar view. When selected, click on each overlay you wish
to delete.
If your sonar view becomes too cluttered with overlays, you may wish to remove
some of them.
Click the
Wiper
button, then left-click on any overlay that has been placed in the sonar
view (such as a
Reference Cursor
, for example) to remove it. Note that you cannot
undo this action.
Zoom windows
You can open up to four true zoom windows when running a Sonar Head.
To open a zoom window, click the
Zoom windows
button in the tool bar, then
click a target of interest in the sonar view.
The zoom area (A) in the sonar view is a fixed size and cannot be adjusted. However,
you can move the zoom area to another location with the cursor. The images in the true
Functions and dialog boxes