Kongsberg cPAP10, Инструкция по эксплуатации

Страница: 22 / 33

cPAP® Portable transceiver
16 374876/B
TTC Menu help button
Figure 8 Help button
This Help button is located on every page in the TTC menu. The
Help menu will provide relevant information about the current
operation.
APOS/TTC Switch button
Figure 9 APOS/TTC Switch button
The APOS/TTC button is located in the top right corner of the
TTC screen.
Select this button to switch between the APOS menu and the
TTC menu.
Transponder acoustic test (on-deck)
1 Select TTC Menu.
2 Place the Dunking transducer or (Test transducer ( T ) face
to face with the transponder.
3 Communication between the cPAP and the transponder
may easily be tested by selecting the ACOUSTIC TEST
tab → enter S/N → Transponder channel No. →
INTERROGATE.
4 A green lamp will blink on the display if there is acoustic
contact with transponder.
5 Press INTERROGATE button again to stop ACOUSTIC
TEST.
6 To set cPAP POWER use left/right arrows to choose
power level → press SET to confirm your selection.