Kongsberg cPAP10, Инструкция по эксплуатации

Страница: 16 / 33

cPAP® Portable transceiver
10 374876/B
C Connectors for USB and LAN . For service personnel
only. (Connection to network and possible APOS/PC
program download via USB.)
- Placed behind a waterproofed cover. Turn the pegs
to lift cover.
D Power ON/OFF switch.
G Trackball - used to position the cursor on the screen.
Left button : Used to click on buttons, operate menus and
select displayed symbols.
Right button : Used to display menus and pop-up
windows.
H Stand-by wake up, with two LEDs indicating status.
I Display light (-/+) adjustment.
J Power connector - male 3-pins connector for the mains
cable.
- This cable (see L ) is used to connect the TTC to a
standard 230 Vac mains supply, to recharge the
internal battery.
K Gas lift springs.
L Battery charge cable in lid folder - supplied with the unit.
M Battery status indicator. The battery should last for approx.
3 hours of continual use.
Turning unit ON and OFF
Turning unit ON
1 Disconnect the cPAP power cable from charging station.