Kongsberg cJoy OT, Руководство оператора

Страница: 71 / 208

Starting operations
Starting operations
This section contains the following topics:
System start-up ................................................................................................................71
Panel test ..........................................................................................................................73
Panel dimming .................................................................................................................74
Day and night palettes......................................................................................................77
System date and time .......................................................................................................77
Display units ....................................................................................................................77
Joystick calibration ..........................................................................................................77
System start-up
The operator terminal and the joystick controller are usually left with power on and the
system in
Standby mode.
It is recommend to restart the controller process stations and the operator stations at
regular intervals, for example every 6 months. It is also considered a good practice to
restart the controller process stations and the operator stations before starting a new DP
operation. A sequential restart of all the units with an interval is recommended.
If the entire system has been shut down, use the start-up procedure given in the
Maintenance Manual for your vessel to start-up the system.
Similarly, use the shut-down procedure given in the Maintenance Manual for your vessel
if the entire system has to be shut down.
Note
To turn off the operator terminal, its 24 VDC power supply must be switched off in the
joystick controller . For further details, refer to the Maintenance Manual for your vessel.
Command transfer
The system can be controlled from the operator terminal or any wing terminal connected
to the system.
385585/C
71