Kongsberg cJoy OT, Руководство оператора

Страница: 77 / 208

Starting operations
Day and night palettes
Two palettes are available, one for day use and one for night use that can be changed
(toggled) by means of the
Day/night button.
Note
The night palette is configured as default.
To switch between day and night palettes, press the Day/night button.
System date and time
You can change the date and time of the system clock at any time. The date and time
that you set at the operator terminal is automatically applied to the wing terminals (if
any) and the controller PS.
To change the system date and time, proceed as follows:
1 Display the System Setup input dialog.
2 Change the values in the
Day
,
Month
,
Year
,
Hour
,
Min
and
Sec
fields as required.
3 Press the Enter button.
• The system date and time is changed to the selected values.
4 Close the System Setup input dialog.
Display units
You can select the type of units (metric or imperial) to be used for measured values
shown in the Heading area, Position area and operational views, and for parameter
values in the input dialogs.
To change the display units to be used, proceed as follows:
1 Display the System Setup input dialog.
2 Change the option in the
Units
field.
3 Press the
Enter
button.
• The display units are changed to the selected option.
4
Close the System Setup input dialog.
Joystick calibration
Calibration of the joystick ensures that a certain deflection of the joystick corresponds to
a specific thruster power depending upon the selected thrust, e.g. Full or Reduced.
385585/C
77