8.
OPERATING WITH KONEXX KONFERENCE KONNECTOR:
A. Prepare your conference phone for operation, set up to the point where all you must do is press the
key to take conference phone "off hook".
B. Using the digital or multiline telephone set, establish your call (make or answer the call).
C. Once the call is established on the digital or multiline telephone set, take the conference phone “off-
hook” (turn it on).
!
Leave your handset OFF THE CRADLE while communicating on the conference phone.
9.
OPERATIONAL HINTS:
A. Make sure your conference phone is taken "OFF HOOK" (turned on) once all parties are connected
in the call.
B. Make sure that your conference phone is in the "TONE DIAL" mode, not in the pulse dial mode.
C. Make sure the telephone handset has been LIFTED OUT OF THE CRADLE.
D. Remember that the KONEXX Konference Konnector must have the AC adapter connected in order
to operate.
E. The KONEXX Konference Konnector will not operate with telephones which have the dialer in the
handset, such as Princess or Trimline phones. The electronics with which the Konference Konnector
interacts are not accessible in these telephones.
F. Remember that the KONEXX Konference Konnector disconnects the telephone handset microphone when the
conference phone is "off-hook".
DIRECT
QUESTIONS/SERVICE
INQUIRIES
TO:
Konexx, Unlimited Systems Corp., Inc.
5550 Oberlin Drive
San Diego, CA 92121
Phone (858) 622-1400
Fax (858) 550-7330
