KONEXX Konference Konnector
OPERATING INSTRUCTIONS - IMPORTANT - PLEASE READ CAREFULLY
The KONEXX Konference Konnector connection device is used to connect a conferencing phone
to digital or multi-line phone systems through the handset port of the digital or multi-line telephone
instrument
.
Figure 1: Typical Installation
1. Unplug the coiled handset cord from the telephone instrument.
2. Plug the short cord on the KONEXX into the handset jack on the telephone base (from which you just removed the
coiled cord).
3. Plug the coiled cord from the handset into the KONEXX jack labeled "HANDSET".
4. Plug the telephone cord from the conference phone outlet labeled "Line" or "Wall" into the KONEXX jack labeled
"DATA PORT".
5. Plug the AC adapter into the power jack on the end of the KONEXX product. The KONEXX Konference Konnector will
not operate without the power supply.
6. Place the switch on the KONEXX to the #3 position. Your telephone can now be used in the normal manner. TRY
YOUR TELEPHONE.
7.
The "OUTPUT LEVEL" switch on the KONEXX product sets the signal level from your conference phone to the digital
telephone and this switch must be set for the type of telephone instrument you are using. The "#2" position is the
highest level and is used with telephones employing carbon microphones. Many of the older hotel/motel telephones
are of this type, as are the majority of older standard telephones found in the home. When the "OUTPUT LEVEL"
switch is set in a position where the level is too high, there will be feedback to the handset earpiece or conference
phone. Feedback may appear as a buzz, tone or even a loud squeal. If feedback is present, move the "OUTPUT
LEVEL" switch
to the next
lower setting until the feedback is eliminated. "OUTPUT LEVEL" sequence is 2-3-1-4 in
descending order
.
