Koncar NO90LIB, Инструкция по эксплуатации

Страница: 67 / 76

13 HOW TO USE THE PRODUCT
1. Press this button to turn on the product. Product will also run
on 1st speed level when this button is pressed.Fig. 15
2. Product will run on 2nd speed level when this button is
pressed.Fig. 15
3. Dig display You can follow which speed the product is cur-
rently working on this display.Fig. 15
4. Product will run on 3rd speed level when this button is
pressed.Fig. 15
5. Press this button to turn on and off the lamp.Fig. 15
6. Pressing and holding any of the motor operation buttons for
more than 2 seconds will initiate a timer function of 15
minutes. A signal will be Displayed once the timer starts and
the motor will stop automatically after 15 minutes.Fig. 15
Filters should be cleaned when "C" signal appears on the Display
or (due to usage) every 2 or 3 weeks. To delete "C" signal after the
filters are cleaned and replaced, press and hold ( ) button more
than 3 secs (when device is off). Letter "E" will appear on the Dis-
play and it will switch to normal operation. If operation before
deleting the "C" signal is required, active motor speed will appear
for 1 sec when you press ( ) button and then the motor will
resume running.
"C" symbol will be displayed after 60 hours of oper-
ation is elapsed.
Fig. 15: 3 Spd Dig Button
Cleaning Periods for Metal Filters:
HOW TO USE THE PRODUCT
25.12.2017 4110 HOOD USER GUIDE 25