Front/Rear Panel
Laser Expected Lifespan
Laser gradually decline in brightness over time. HEAT is the dominant factor that leads to the
acceleration of this decline. Packaged in clusters, laser exhibit higher operating temperatures than
in ideal or singular optimum conditions. For this reason when all color lasers are used at their fullest
intensity, life of the laser is significantly reduced. It is estimated that a viable lifespan of 4,000 to
10,000 hours will be achieved under normal operational conditions. If improving on this lifespan
expectancy is of a higher priority, place care in providing for lower operational temperatures. This
may include climatic-environmental and the reduction of overall projection intensity.
Safty Notice:
Please read the following notes carefully because they include important safety information
about the installation,usage and maintenance of this product. It is important to read all these
notes before starting to work with this product.
1. Laser Aperture One
2. Sensitivity knob
3. Sound Active Microphone
4. AUTO mode
5. Sound Active mode
6.Power switch ON/OFF
7. Power Jack
Page 5
Page 2
Always make sure that you are connecting the light to the proper voltage, as per the
specifications in this manual or on the product's sticker. Never connect the light to a
dimmer pack. Make sure that the power cable is not cracked, crimped or damaged. Ne
The maximum ambient temperature (Ta) is 104 F (40 C). Do not operate
the fixture at a higher temperature. In case of a serious operating
problem, stop using this product immediately!
There are no user serviceable parts inside the light. Any reference to servicing this unit
you may find from now on in this User Manual will only apply to properly consult we
certified technicians. Do not open the housing or attempt any repairs unless you
Avoid direct eye exposure to the light source while the fixture is on. Always disconnect
the light from its power source before servicing. Always connect the light to a
grounded circuit to avoid the risk of electrocution.
This product is for indoor use only! Use only in dry locations. Keep this device away
from rain and moisture, excessive heat, humidity and dust. Do not allow contact with
water or any other fluids, or metallic objects.
7
2
3
4
5
6
Power
110V 240V
Ground
Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is
possible if lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING
statement in the user manual. Read all instructions careful.
1