General instructions
Function & Setting
Unpacking:
Thank you for purchasing this product. Please read user guide for safety and before using
Sound Active
the product. Keep this manual for future reference. This product can create perfect laser
The change of the laser pattern is controlled by sound, that is, the rhythm of the sound
programs and effects since it has passed a series of strictly tests before delivery. Please check
control the effect of the changing laser pattern. Turning the sensitivity knob in the
the attachments listed on the page after opening the carton. Immediately upon receiving
clockwise direction to increase the fixture’s sensitivity to sound, the knob in the counter
a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present
clockwise direction to decrease. The laser diode will automatically turn off after 8
and that they are in good condition. If any part appears damaged from shipping, or if the
seconds when the music stops.
box shows signs of mishandling, notify the shipper immediately. In addition, retain the box
and all the packing material for inspection.In any event, save the carton and all packing
AUTO
material because, in case that you have to return the fixture to the factory, you will have to
Auto cycles the built-in programs without being controlled externally. It has no laser OFF.
do so in its original box, with its original packing.
The mode allows a single unit to react to the beat of the music in the master mode.
1. Laser Light: 1PCS
1. Install the units in a suitable position (laying or appending).
2. Power Cable: 1PCS
2. Set dipswitch to select Sound Active or AUTO mode.
3. User Guide: 1PCS
3. Turn on the unit power, the unit begins reset, then the unit begins working.
Technical Specification
4. The unit will react to the low frequencies of music via the internal microphone.
1. Voltage: bi-voltage 110V -220V-250V AC, 50HZ-60HZ/ Fuse: 2A/250V
Adjust the audio sensitivity knob on the back of the unit to make the unit more or less
2. Rated Power: 50W
sensitive in sound active.The panel has LED indicating for sound active.
3. Laser:
Color
Wavelength
Power output
Scanner speed
Red
650nm
100mW
10kpss-15kpss
Green
532nm
30mW
Mixed yellow:
130mW
5. Laser class:
Class 3B
6. Working Modes: Sound Active, AUTO
7. Graphics & Effects: 120 beam show and 7 animated graphics show patterns
8. Item Size: 167*132*102mm (L*W*H)
9. inner box: 262*225*175(0.013m³), carton:470*280*395(0.052m³), 4pcs/carton
10. N.W.: 1.2Kg, Gross Weight: 1.8Kg
Page 1
Page 6