Konami PODIUM KP3, Руководство оператора

Страница: 15 / 20

2-1 © 2010 Konami Gaming Inc. P/N 810061
SECTION 2 - SET-UP & OPERATIONS PODIUM KP3
SECTION 2
Set-Up & Operations
Overview
In Section 2, Set-Up & Operations, describes addressing the
installation, setting up the machine and operations.
This section covers the following topics:
• Physical Specications
• Environmental Specications
• Unpacking and Inspecting
• Candle (Signal Tower) Installation
• Drop Box Door Switch
• Slot Accounting System
• Opening and Closing Doors
• Lock Installation
• Setting the Hopper Level Probe
• Installing Coin Acceptor Sample Coins
• Bill Validator Options
• Power-Up
• Random-Access Memory (RAM) Clearing
• Option Settings
HEIGHT
WIDTH
DEPTH
(CABINET)
DEPTH
(AT COIN BOWL)
Physical Specications
Cabinet Specifications
• Height (Extended Top) 52.39" 133.0cm
• Height (Tombstone Top) 54.39" 138.3cm
• Height (Short Top) 45.00" 114.3cm
• Depth (At Coin Bowl) 19.44" 49.4cm
• Depth (Cabinet Only) 15.00" 38.1cm
• Width (Cabinet) 22.00" 55.9cm
• Weight 234.5 lbs 516kg
Environmental Specications
Line Voltage Input: 100–240 VAC, 50 or 60 Hz.
The following calculations are based on an input voltage of
120 VAC:
• Power supply input voltage 110 VAC: 108–120 VAC
(nominal 120 VAC) at 50/60 Hz.
• Power supply output voltage: +12 VDC, +24 VDC.
• Current draw at rest: 1.83 A (220 W).
• Current draw during game play: 1.9 A (228 W).
• Maximum operating ambient temperature: 104° F
(40° C).
• Minimum operating ambient temperature: 32° F (0° C).
• Maximum surface ambient temperature: 105° F (41.5° C).
• Minimum surface ambient temperature: 32° F (0° C).
• Maximum relative humidity: 95% (non-condensing).
Unpack and Inspect
Unpack and inspect the machine before power is turned on. If
the machine has been damaged during shipping, contact your Konami
Distributor, or Konami Customer Service Representative, depending
on warranty and sales contract terms.
For Return Merchandise Authorization (RMA) information, see
Section 1 of this manual.
Carefully unpack and remove all loose parts and shipping
materials. Inspect components for damage. Verify the power cord is
properly routed out of the cabinet. Verify all wire connectors are rmly
seated. Check all display areas for signs of broken glass or bulbs.