Konami Mocap Boxing, Руководство оператора

Страница: 40 / 52

7 Maintenance
Troubleshooting
If the power switch is turned ON but the machine fails to start properly, take the following
measures.
If the machine still malfunctions or any other problem than described below
occurs, immediately turn OFF the main power switch, unplug the power cord from the
and contact your nearest dealer.
Trouble causes and check Measures
No image on screen,
fluorescent light failure to light
No image on screen:
fluorescent light on.
Fluorescent light failure to
light up.
Rotating light failure to light
up or rotate.
Screen too dark or too bright.
Start button or select button
malfunctioning.
Button functioning, but failure
light up.
(Select button does not light
No power turned ON.
(Main power switch,
Power cord disconnected from
the machine or wall
o u t l e t .
Back door open or closed.
Circuit protector activated.
Memory card not inserted.
unit defective.
Monitor defective.
Fluorescent fight or starter
broken.
Rotating light lamp broken.
Rotating light control PCB in
trouble.
Monitor maladjusted.
Switch wires disconnected from
button.
Start button defective.
Lamp wires disconnected from
button socket, or reversely
connected.
Button lamp (LED) defective.
ON the power switch.
Check also the shop’s circuit
breaker.
Reconnect the power cord
tightly.
Screw down the back door
tightly. (The switch has
been to cut off the
power.)
Take an appropriate measure.
Check the memory card for
position.
Immediately OFF the main
power switch, unplug the power
cord from the receptacle and
contact your nearest dealer.
Replace the fluorescent light or
with new one of the same type.
Replace the lamp with new one
of the same type.
Immediately turn OFF the main
power switch, unplug the power
cord frotn the receptacle and
contact your nearest dealer.
Readjust the brightness on the
monitor adjustment
Reconnect the switch wires to the
socket.
Replace the start button with new
one.
Reconnect the lamp wires to the
socket.
Check the performance on the
CHECK” screens. Replace
the button as required.