Konami Lethal Enforcers II Gun Fighters, Инструкция по эксплуатации

Страница: 9 / 29

LETHAL ENFORCERS II
GUN FIGHTERS
TECHNICAL INFORMATION (cont.)
(9) COIN OPTIONS
COIN OPTIONS
FREE PLAY
NO
COIN MECHANISM COMMON
COIN SLOT1 1 COIN 1 CREDIT
COIN SLOT2
1 COIN 1 CREDIT
PREMIUM START
YES 1
2 CREDITS TO START
1 CREDIT TO CONTINUE
can change this with DIP switch 1 on the main PCB
(sw2)
“NO” or “YES 1” to “YES 4.” (You can set the play fee
for starting higher than the play fee for continuation)
FACTORY SETTINGS
SAVE AND EXIT
EXIT
as “SOUND OPTIONS”
START=DOWN
GUN SETTING
__
*When the “COIN MECHANISM” is set at “COMMON” on the DIP switch 1 on the main PCB is
“OFF”). On the cabinet with 2 coin slots, coin setting must be done for each coin slot.
When the “COIN MECHANISM” is set at “INDEPENDENT” on the DIP switch 1 on the main PCB
is “ON”), the left coin slot will be for player 1, the right one for player 2.
When you want “PREMIUM START” setting, choose the number of extra coins necessary for starting, then
decide the coin setting for continuation. The number of coins for starting will be the sum of both numbers.
If you do not set premium start, the number of coins necessary for start and continuation will be the same.
*COIN SETTING OPTIONS
COIN(S) 1 1 1 1 1 1 1 2 2 2 3
3 3 4 4 4
CREDIT(S)
1 2 3 4 5 6 7 1 3 5 1 2 4
1 3 5
TROUBLESHOOTING ABOUT GUN AND MONITOR
Here is a list of commonly found problems and their possible solutions.
l
Erratic gun shot placement.
-Check to see that there is no reflected light from fluorescent or neon lights bouncing off of the screen.
Strong sunlight also affects the shot placement.
l
You cannot shoot a certain area in the screen.
-Check to see the monitor’s purity with red, blue, green, and white screen in the “COLOR CHECK”
in the Manual Test. If you find purity problems, you should degauss the monitor.
-Check to see there is no magnetic equipment around the cabinet. This may also cause the monitor
to become magnetized.
-After degaussing the monitor, you can check the gun and monitor in the “GUN CHECK” in the Manual Test.
Screen flashes when trigger is pulled but no shot is made.
-Check to see the gun lens inside of the barrel is clean.
-Adjust the monitor’s brightness with color bar screen in the “COLOR CHECK” of the Manual Test.
CLEAN MONITOR AND MIRROR REGULARLY.
. .