Konami Lethal Enforcers II Gun Fighters, Инструкция по эксплуатации

Страница: 5 / 29

GUN FIGHTERS
TECHNICAL
INFORMATION
Required power capacity
GND-Vcc 5V 4A or more
GND-( +
*See the Wiring Diagram.
output
R (red) analog, positive
G (green) analog, positive
(blue) analog, positive
SYNC. H-V complexed, negative
The monitor should be horizontal and face up installed.
There is no sound volume knob on the PCB. Sound level should be adjusted in the “SOUND OPTIONS”
in the Manual Test mode. (See page 6.)
Handle with care.
SWITCH SETTINGS AND CABINETS AVAILABLE
game is equipped with 2 way DIP SWITCH on the main PCB; The following changes will easily
done with these DIP switches.
DIP SWITCHES
CONTENTS
SOUND OUTPUT
COIN
MECHANISM
STAGE SELECTION
*Bold letters show default settings.
ON OFF
MONAURAL
STEREO
INDEPENDENT
COMMON
YES
NO
Uote:
1) thru on Dip switch 1 and Dip switch 2 aren’t used.
2) On the STEREO cabinet, set swl on Dip switch at “ON” so that you can get better music and sound effects.
2) Regarding other sound options, game options and
coin options, refer to “Manual Test” on page 6.
CONTROL PANEL INFORMATION
Use a dual control panel with a gun and a start button for each player.
GUN
START
BUTTON