Konami GQ830-HD Скачать руководство пользователя

Страница: 46 / 76

7 Maintenance

How to replace the start button

•Before replacing the start button, be sure to turn OFF the main power

switch and unplug the power cord from the receptacle.

•When replacing parts, be sure to use parts of the correct specifications.

Never use parts other than the specified ones.

•Strictly refrain from disassembly and repair of parts which are not indicated

in this manual, as well as settings and remodelling.

7-3 Replacing the start button

Be sure to turn OFF the main power
switch and unplug the power cord
from the receptacle.

Remove the screws and datach the
cover.

Disconnect the connectors.

MEMO

•Be careful not to force the cover up

too far. The wires connected may be
damaged inside.

Remove the screw off the band that
secures the button and the socket.

Pull out the socket from the button.

Screws

Cover

Connectors

Socket

Screw

Band

Содержание GQ830-HD













































































Результаты поиска

Содержание GQ830-HD

Отзывы:

Похожие инструкции для GQ830-HD

Бренды по названию

Популярные бренды

Konami GQ830-HD, Руководство оператора

Результаты поиска

Содержание GQ830-HD

Отзывы:

Похожие инструкции для GQ830-HD

Бренды по названию

Популярные бренды