Konami Bass Angler, Руководство оператора

Страница: 6 / 37

4
Operation
Precautions for use
•If by any chance smoke, unusual smell or noise comes out of the kit, immediately
turn OFF the machine’s power switch and unplug the power cord.
Do not operate the kit.
·Using the kit in abnormal conditions could result in fire or accidents.
1 Turn OFF the machine’s power switch.
2 Unplug the machine’s power cord from the receptacle.
3 Contact your nearest dealer.
•Make sure all the connectors are tightly connected and not covered with dust.
·Doing so could result in electrical shock or fire, so inspect the power cord periodically.
•Do not touch the kit with wet hands.
·Otherwise, an electric shock may be caused.
•Do not pull out and push in the security cassette while the machine is running.
·Otherwise the machine will not function. Be sure that the security cassette is as
specified for the game.
•Never disassemeble, repair or modify any section other than those specified in
this manual.
·Doing so could result in fire, malfunction or equipment failure.
·Ask your nearest dealer to perform repairing, etc..
·We do not assume any responsibility for any damages that would be caused by
tampering with the kit.
In case of abnormality
ENGLISH
プ グ
•Do not use this product anywhere other than industrial areas.
·Using in a residential area or an area next to a residential area could affect signal
reception of radios, television sets, telephones, etc..
•The following users should not play the game.
·Doing so could cause accidents or illness.
·Those under the influence of alcohol. ·Those suffering from or being treated for
arm or wrist ailments.
•Never connect and disconnect the connectors to and from the machine with wet hands.
·Doing so could result in electrical shock.
•In handling the cables of the machine and this kit, follow the instructions below.
·Otherwise an electric leak, fire or electric shock may result. The machine may fail to
function too.
·Do not damage the power cord. ·Do not modify the power cord.
·Do not bend the power cord excessively. ·Do not twist the power cord.
·Do not heat the power cord. ·Do not pull the power cord.
·Do not bind the power cord. ·Do not tread on the power cord.
·Do not sandwich the power cord. ·Do not drive a nail into the power cord.
•If by any chance any of the connectors and cables of the machine or this kit,
immediately stop using the machine and ask your nearest dealer to replace the
damaged part.
·Using a damaged power cord or power plug could result in fire or electrical shock.
Operation
WARNING
CAUTION
4