Kompernass CR 5 A1, Руководство по эксплуатации

Страница: 16 / 108

13 CR 5 A1
GB
CY
Video standby mode
In video standby mode, the screen shows the following overview:
A – displays the remaining recording time depending on resolution and
available storage space
B – current video resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
E – time display (only when the "Time & date stamp" is activated)
G – symbol for motion detection (only visible if the function is activated)
H – symbol for a loop recording as well as its length in minutes (here 3 minutes)
I – display for exposure correction
J – symbol for video standby
K – red dot fl ashes during recording
L – symbol for a write-protected fi le
Start / end recording
Press the ▲ button repeatedly as required to zoom into the subject. Hold
down the button for fast zoom. You can use the ▼ button in the same way to
zoom out. Press the / button to start the video recording. During the
video recording the operating display blinks green and red. Press the button
again to stop the recording.
If you press the MODE button during recording, the symbol is displayed
and the current recording will be write-protected.
NOTE
► As soon as the camera is connected to the vehicle's power supply, the
recording starts. To stop the recording, press the
/ button .
IB_47583_CR5A1_LB7.indb 13 23.04.14 17:01