This option allows you to use the standard default mode where the controller runs lights at
night in a “Street lamp” mode, based on light falling on the panel or to power auxiliary
items at all times, regardless of it being day or night.
1F0 Will disable the timers and always power the load
1F3-1F9 will run the lamps for the time specified, with a range of 3 to 9 hours.
Press and hold K2 until the voltage is able to be set.
Press K2 multiple times until [1F3] appears in the display and press K1 to change this to a
longer duration, or set to “1F0” to have the load always output power during the day unless
overloaded, or the battery voltage drops below the cut-off.
IMPORTANT:
Remember to select 9F using K2 and then press K1 to save the setting and reboot the
controller. The following will appear in th
Modes
Factory Defaults
U00 Voltage auto detect
U12 12V Battery
U24 24V Battery
P NOT FUNCTIONAL
1H NOT FUNCTIONAL
2H NOT FUNCTIONAL
3H NOT FUNCTIONAL
4H NOT FUNCTIONAL
1F0 Load always on
1F3 Load comes on for 3 hours
1F4 Load comes on for 4 hours
1F5 Load comes on for 5 hours
1F6 Load comes on for 6 hours
1F7 Load comes on for 7 hours
1F8 Load comes on for 8 hours
1F9 Load comes on for 9 hours
2F NOT FUNCTIONAL
7F Reset controller to factory settings
9F SAVE changed settings and reset controller
U00 Voltage auto detect
1F3 Load comes on for 3 hours
5
Programming Method
