komoder Luxury II, Руководство пользователя

Страница: 8 / 18

11 12
④
①
②
▲
Push the shoulder plastic part inside to 40-50mm by your hand.
Put the armrest close to the main body side,lift up the front of the armrest then insert the main body
side frame and push back.
Put the power plug into the socket.
Connect the air hose of armrest with the air tubes on the seat tightly, the black air tube should be
connected with the air hose marked with "1" and the grey air tube should be connected with the air
hose marked with "2".
Insert the rear armrest fixed plate into the fixing hole on the chair body.
⑥
Unzip the shoulder airbag, screw up the outside of airbags by 2pcs M6*20 screws, and then lift up the
airbag, put 1pc M6*30 Screw inside the hole and then screw up, zip up.
⑦
Remove the rubber plug of the armrest, spin the screws inside the hole tightly then put on the
rubber plug tightly.
①
④
⑦
⑤
③
②
③
1
2
⑤
Push inside 40-50mm
⑥
③
▲
M6 * 20
M6 * 20
④
M6 * 30
Installation
Installation
(
3
)
Installation Installation
Installation
Air hoses connect with the
air nozzle
and power line
plug connect with the socket
Unscrew the bolt from hanger of legrest.
Connect the legrest's air hose with the corresponding air nozzles of the main body tightly.
Plug power adapter into outlet.
raise the rotation shaft board on hangers, raise the legrest with hands, put rotation shaft
into hangers on main body, and put rotation shaft board down.
Screw it back tight.
Connect the legrest leather piece with seat by velcro .
Caution: Make sure the air tube and wires cannot twist together.
Paste the leg-rest hanging leather
velcro on the seat.
Step 2. How to assemble the legrest
Hanger
Bolt
Air nozzle
Socket
Axis
Power line plug
Air tube
Air tube Power line
Axis cover
Lift the legrest to
put the axis into
the hanger
Put down the axis cover
And screw on the bolt
CAUTION:
Do not squeeze the air tubes during the installation. This may cause air leakage or the air
bags are not inflatable.
Please make sure that the fixed plate and LED wire need to be plugged firmly, otherwise the armrest
may drop or LED light does not shine.
Step 3 How to assemble the left and right armrest .
Fixed hole
Fixed panel
Air tube
Power cord
Rotating stand on
the side of chair body
Assembly steps
Cylindrical plug
Inner plate of armrest
Installation
(
4
)