15
16
1
▲
Press down the head part to make the gravity
fall on the back castors. Then push the chair
to desired destination steadily and set it
down slowly.
Make sure the massage
machine rollers stop in
the upper of backrest,
then sit on the chair slowly.
The remote control will
beep once the body scan
starts working. When you hear
that beep sound, you can press the
up/down key on the control to manually
adjust the shoulder position.
If you feel the
massage isn't
strong enough,
you can remove
the pillow and
shoulder cushion .
During massage chair backrest lie down
process, can't move the armrest.
Rolling Wheel
No more than 40 degrees
Check
Kind suggestion
The adjustment before massage
Caution
Environment
Check environment
Don’t use the chair in wet places like near
swimming pool, bath room to avoid lea-
kage or electric shock.
Don’t use under sunlight or near stove
or other heating place to avoid upho-
lstery deteriorated.
Please use chair in flat place to avoid
chair falling or noise or other unexpected
trouble.
Check places in front
Check the areas when back and leg extending,
make sure no people, pets or other things
around.
Check power cable, plug
Space size for using the chair
At least 10cm from wall.
(1) Clean the dust on plug on time.
(using dry cloth).
(2) No damage, re-do, bend, stretch, tie or
press with heavy thing(especially can’t be
pressed by the chair) on power cable.
At least 50cm in front of the leg.
Check surroundings
When the backrest or legrest reclines or
extends, please pay attention to:
(1) Check any person or things in every
direction.
(2) Check the space size.
The adjustment before massage
How to move massage chair
Adjustment before massage
Caution
Don’t move chair when it’s working in case
of accidents or damage
M
a
s
s
a
g
e
o
p
e
ra
tio
n
How to move
Bind the cables and put them in the seat to
avoid damage when moving.
If you plump the chair, it may damage the inner
parts of the chair.
Don’t use the castor if the floor is wooden or
other easy damaged material. It will need 2
or more persons to lift the chair.
Make sure the power is off and the plug
doesn't touch the floor(It’s better to
let the chair in standing
status to avoid the back
crashing the floor)
Normally
Please hold the footrest to move the
chair as shown in the picture in case
any scratches on the leatherette
Right position:
Your back
cling to the chair back, the
head clings to the pillow.
Avoid a wrong detection of your shoulder
position which will influence the massage
comfort.
Because the chair is heavy, it may ruin
your floor in long time
setting. Please put a
blanket or other soft
things toprotect
your floor.
M
a
s
s
a
g
e
o
p
e
ra
tio
n
Before adjustment
To avoid injure caused by
wrong position of the
massage head.
When doing Acupunture Point Detecting,
if the massage head can not find the
shoulder position, it will default to the
middle part.
