the corresponding signal source DP-1 / DP-2.
Note: The operation of selecting a signal source for a layer is to first click
the corresponding layer button, and then click the signal source button to be
switched.
6. Single screen point-to-point display debugging is completed. Select the
"MENU" menu key to return to the main menu, select the "Shift" + "" key to
enter the save preset interface, and confirm the save to mode one.
7. Select the "MENU" menu key to return to the main menu and select
screen layout layout 4. Enter the corresponding layer setting interface to
adjust the image size and position corresponding to each layer. Select Shift +
button to save to mode two.
8. Equipment arrangement is complete