KOMFI-RIDER 4000, Руководство пользователя

Страница: 17 / 32

17
■
Stopping
1. Release the speed control lever completely, and the scooter will brake and stop
naturally.
2. Turn the power switch to
「
OFF
」
. Then pull out the key.
CAUTION
The stopping distance will vary with your forward / reverse speed. Therefore please
begin braking as early as you can.
While parking your scooter, be sure to park on flat ground and then turn the power
to “
OFF
” before you get off.
6. CHARGING AND BATTERY
6.1
CHARGING THE BATTERY
Be sure to follow the procedures shown below accordingly.
1. Turn the power switch to “ OFF
”.
2. Connect the charger‟s cord onto the power outlet.
3. Open the charging socket cap on the scooter‟s tiller. Then connect
the charger‟s round plug to the charging socket.
4. Turn on the switch on the charger.
5.
Both the charger‟s red
LED lights will be on at the beginning of
charging. The charging duration is at least 6
－
8 hours, but it will
vary to 10 hours, based on the status of battery and ambient
temperature.
6. The orange LED will change to green when the charging is
completed.
7. Turn off the charger and disconnect the cord.

SUGGESTION
1. Do not disconnect the charger cord if the charging is not completed. The battery life
will be seriously shortened or decayed if the battery is repeatedly used without being
fully charged. Therefore, be sure to charge the battery fully every time.
2. While finishing charging, although the charger is turned OFF , the electric power will
still slowly discharge if the cord is not disconnected.
3. If you will not use your scooter for a long time, it needs to be charged at least every
three months to keep the battery in a full status.
4. The charging time will vary with the ambient temperature, and it will be longer in the
wintertime.