WHAT THE KOMET AMBIKAB
IS:
The Komet AmbiKab
is a self contained, powered stereo Wet/Dry/Wet system that allows the
user to employ ambient, time-based effects such as reverb and delay (“wet signal”) to the guitar
sound independently from the straight guitar amplifier tone (“dry signal”).
WHAT THE KOMET AMBIKAB
DOES:
When you plug your guitar amplifier into the AmbiKab's
Speaker Input
, the amplifier is
connected directly to the internal
12
” guitar speakers.
From there, a small portion of the signal is sent back out of the system via the adjustable Line
Level jack. This signal is sent to the effects, and then returned to the AmbiKab's
Effects In
,
either in mono or in stereo. The AmbiKab’s
internal dual channel Class D power amp amplifies
the effects and powers its own pair of
10
” speakers.
As a result, the amp never “sees” the effects and thus sounds and reacts exactly as if there were
no effects used at all. The all important: guitar-amp-guitar signal chain - remains pure and
unaffected.
CONNECTING TO THE KOMET AMBIKAB
:
The Komet AmbiKab
can be used with any guitar amplifier that has a speaker output jack.
1. Connect the AmbiKab's
AC input using the grounded IEC power cable to a wall socket and
engage the Power switch on.
2. Connect your amplifier's output to the AmbiKab's
Speaker Input
jack using a quality
SPEAKER CABLE
with 1/4” connectors
3. Connect the AmbiKab's
Effects Send
jack to your effects unit's Input jack using a shielded
GUITAR CABLE
.
4. Connect your effects unit's stereo outputs (
Left/Right
) to the AmbiKab's
two Effects input
jacks using another pair of shielded GUITAR CABLES
If you are using mono effects, use a single shielded GUITAR CABLE from your effects unit's
output to the AmbiKab’s
Left/Mono
input. This will automatically bridge the AmbiKab's
stereo channels and send the mono signal to both effects speaker.
Copyright 1999-2017, Komet
Amplification. Group, L.L.C. May not be reproduced in any form without express written consent from Komet
Amplification
