Komet Aero 33 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 22

Komet Aero 33 Скачать руководство пользователя страница 22

ii.

the Product

(s)

is damaged from abuse, misuse, improper installation, or neglect;

iii.

the Product

(s)

is altered or appears to have been attempted repair by unauthorized

personnel;

iv.

if the Product

(s)

has been modified in any way; or if a defective product has remained in

use, resulting in consequential damage to the Product

(s)

.

SHIPPING INSTRUCTIONS

Note

: Komet



Amplification highly recommends that you review all packaging, insurance

requirements, and shipping recommendations of the shipping company you intend to use.

Komet



suggests using a:

30

X

15

X

15

foam injected,

300

lb

. test, corrugated cardboard shipping

box.

Komet



also suggests having your amplifier professionally packaged to ensure safety.

Shipped amplifiers should be insured for at least the full value of the amplifier.

Please

do not

return ship your amplifier with the AC power cable.

We recommend you bubble wrap and box your vacuum tubes within the amplifier.

We are a commercial address. Please check any corresponding box on shipping label.

Please

do not

return ship your amplifier for

"

Home Delivery

"

service or Saturday delivery.

Please

do not

send for early morning

(before 9:00 A.M.)

delivery. We prefer afternoon delivery.

Note

: Komet



Amplification will not be held responsible for any Komet



amplifier, amplifier

component, or contents, damaged or lost during shipping to Komet



Amplification. Komet



Amplification  will  not  be  held  responsible  for  any  damage  or  loss  of  an  amplifier  due  to
improper  packaging  or  labeling  by  the  customer  or  packager.  Any  and  all  damaged  or  lost
packages  and  their  contents  in  which  claims  are  filed  for  damage  via  shipping  to
Komet



Amplification are between customer and shipper. Komet



Amplification will do their

absolute best to help any customer with a shipping insurance claim.

Our address:

Komet Amplification, L.L.C.
1865 Dallas Drive
Baton Rouge, La. 70806

-

1454

(225) 926-1976

E-mail:

info@kometamps.com

Copyright 1999-2017, Komet



Amplification. Group, L.L.C. May not be reproduced in any form without express written consent from Komet

«
...
20
21
22

Содержание Aero 33























Отзывы:

Нет отзывов