KOMDRUCK ILP-1100 Series, Руководство пользователя

Страница: 16 / 27

Version 2.1, 07/2019 page 16 of 27
8. Auto Cap timeout (sec):
The printer will automatically close the printhead after 5 seconds in the „Ready“
state. This interval can be changed based on application request.
9. Features:
 AUTO LF:
If this feature is
enabled , the printer will perform an LF motor calibration if
necessary automatically before printing.
If this function is
disabled , the LF motor calibration must be performed
manually with "LF calibration error".
It is recommended to leave this option enabled.
 AUTO PPS:
If this feature is
enabled , the printer will automatically adjust the distance
from the printhead to the paper before printing.
When
disabled , the distance from the printhead to the paper is the same.
 OVERSPRAY:
If this feature is
enabled , if the artwork size is greater than the scanned label
height, the printer will print slightly to the next GAP.
If this feature is
disabled , if the artwork is larger than the scanned label
height, the printer will only print to the bottom of the current label.

SLOW SWEEP
:
With this feature enabled , the printhead will print at a certain speed.
If this feature is disabled , the printhead will print at different speeds,
depending on the selected print mode.
All actions mentioned in points 1-9 must be confirmed with the button "Send
settings to the printer". If this is not done, the printer has not adopted any
settings!