Version 2.1, 07/2019
page 14 of 27
4.2.
Print settings
1.
Print media type:
Label with GAP
Label with BlackMark
Z-Fold / continuous print media, continuous paper
Cut-Sheet / single sheet
2.
Print media height:
For continuous paper and single sheet, the print medium height can be changed
to a maximum of 300 mm. The height set here defines the cutting position as well
as the position of the tear-off edge.
3.
Output mode:
After Each Label: If the setting „After Each Label“ is set, it will be cut after
each printed label.
After Job: „After Job“ means that after finishing the print job the label web is
cut off.
Continous: The printer will do the full job and print each label in sequence. In
the case that several print jobs have been sent, they will be printed one by
one without waiting.
