Komatsu WA100M-7, Руководство по эксплуатации и обслуживанию

Страница: 156 / 304

3.3 Operation Operation
3-86
WA80M-7, WA100M-7 – VENAM03001
Picking up the load
1. Approach the load slowly.
WARNING
Danger of accidents! If the load is not in the centre of gravity, the
stability of the machine will be negatively affected. Drive the fork-
lift attachment under the load until the load contacts the back of
the forklift attachment.
2. Drive the forklift attachment under the load so the load con-
tacts the back of the forklift attachment.
3. Slightly tilt the forklift attachment to prevent the load from slip-
ping off.
4. Lower the boom to the carrying position.
5. Raise the load to the proper height a short time before reach-
ing the unloading location. Raise the load a little higher than
necessary.
6. Set the load down slowly and from above onto the unloading
location.
7. Slowly lower the boom until it is possible to pull the tines out
from under the load.
8. Check that there are no persons standing behind the
machine, and back up from the unloading location.