Komatsu SK1020-5N, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 31

SAFETY
1-2 SK1020-5N/SK1020-5NA
SAFETY LABELS
Safety labels are affixed to the machine to inform the operator or maintenance worker when operation or maintenance of the
machine may involve a hazard.
This machine uses safety labels using words and safety labels using pictograms to indicate safety procedures.
Example of Safety Label Using Words
Example of Safety Label Using Pictogram
Safety pictograms use a picture to express a level of hazardous condition
equivalent to the single word. These safety pictograms use pictures in
order to let the operator or maintenance worker understand the level and
type of hazardous condition at all times. Safety pictograms show the type
of hazardous condition at the top or left side, and the method of avoiding
the hazardous condition at the bottom or right side. In addition, the type
of hazardous condition is displayed inside a triangle and the method of
avoiding the hazardous condition is shown inside the circle.
Komatsu cannot predict every circumstance that might involve a poten-
tial hazard in operation and maintenance. Therefore, the safety messages
in this manual and on the machine may not include all possible safety
precautions. If any procedures or actions not specifically recommended or allowed in this manual are used, it is your responsi-
bility to take the necessary steps to ensure safety.
In no event should you engage in prohibited uses or actions described in this manual.
The explanations, values and illustrations in this manual were prepared on the latest information available at that time. Con-
tinuing improvements in the design of this machine can lead to changes in detail which may not be reflected in this manual.
Consult Komatsu or your Komatsu distributor for the latest available information for your machine or for any questions
regarding information in this manual.