Komatsu PC490-11, Инструкция по установке и эксплуатации

Страница: 118 / 492

• Press the switch to display the working mode selection screen. For each set mode, P, E, L, B, ATT/P, ATT/E
are displayed at the top right of the monitor display.
• For machines ready for installation of attachment, the attachment mode is added to the display.
For handling of machines ready for installation of attachment, see “ATTACHMENTS AND OPTIONS
(6-1)”.
• When the monitor starts up, if the working mode setting is
B mode, the confirmation message in the figure is dis-
played and the buzzer sounds.
• When starting up and staying in B mode, always press
function switch F6 (Yes).
If you press F5 (No), the system starts up in E mode.
If you want to have automatic setting of P, E, L, B, ATT/P or
ATT/E mode (optional default setting) when starting engine ,
ask your Komatsu distributor to change the setting.
How to use working mode selector switch
1.
When working mode selector switch (2) is pressed, the
Working Mode selector screen is displayed on the monitor.
2.
Press function switches F3 or F4 at the bottom of the screen or working mode selector switch (2) to change
the mode selection one at a time.
If no switch is touched for more than 5 seconds, the selected working mode is automatically set as the
working mode and the screen changes to the one for steps 3 and 4.
REMARK
To return to the standard screen without changing the
working mode, press function switch F5.
3.
After selecting the desired mode, press function switch F6
and the mode is displayed in the center of the monitor dis-
play.
(Example: When the power mode is selected: P)
4.
After 2 seconds, the working mode display at the top right
of the screen is highlighted in yellow.
EXPLANATION OF COMPONENTS OPERATION
3-46