Komatsu PC12R-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 34 / 208

GENERAL PRECAUTIONS
32
2.2.8 PREVENTING BURNS
2.2.9 PREVENTING DAMAGE DUE TO AS-
BESTOS POWDER
2.2.10 PREVENTING DAMAGE CAUSED BY
THE WORK EQUIPMENT
RWA00990
•
If the engine coolant, the engine oil and the hydraulic oil are
hot, use heavy cloths and wear gloves, heavy clothing and
safety goggles before carrying out any check or touching the
hot parts.
•
Before checking the coolant level, stop the engine and let the
fluid cool down.
If a check is necessary due to the overheating of the engine,
slowly loosen the radiator plug to release any residual pres-
sure before removing it. The hot fluid that spurts out may
cause serious burns.
•
Before checking the engine oil and hydraulic circuit oil levels,
stop the engine and let the oil cool down. The hot oil that can
be sprayed out of the tank may cause serious burns.
RWA01000
RWA01010
•
Asbestos powder can be hazardous to your health if it is in-
haled.
•
If you handle materials containing asbestos fibers, keep to the
instructions given below:
1 - Do not use compressed air, but only aspirators to clean
the machine and make sure that the room in which you are
working is properly ventilated.
2 - Use low-pressure water to keep down the dust when clean-
ing.
3 - If there is danger that there may be asbestos powder in the
air, operate the machine with the wind to your back when-
ever possibl.
4 - Even if the cab provides suitable protection, use an ap-
proved and homologated respirator.
5 - The powder gathered during the cleaning operations must
be dampened and put in a sealed and marked container, so
that it can be safely disposed of according to the regula-
tions in force.
RWA01020
•
Do not stand within or approach the operating radius of the
work equipment, even when the operator is on board the ma-
chine and the engine is running.
•
Do not stand or work under the arms or the articulations when
the arms are lifted, if you are not sure that the safety locks
have been duly engaged.
•
Do not carry out any operation requiring the lifting of the arms,
if you are not sure that the locks are correctly positioned and
coupled to the arms.