Komatsu AE50, Описание параметров устройства

Страница: 27 / 96

E-2
Travel System Parameter Setting Function
"*"sign adjustment item is fixation in L/M/H mode, and it changes into the value set only at U mode.
A set value of the adjustment item including "*" sign can change any mode of L/M/H/U mode.
Adjustment Item Content of Function Initial Value Range Remark
Power Level (L/M/H/U)
Switching from low to high mode, more acceleration
and higher lifting speed is available.
2 (M) 0: U / 1: L / 2: M / 3: H
*
Custom (U): Travel Power To set torque properties of travel power 2 (M) 1: L 2: M 3: H
Initial Value
L:2, M:2, H:3, U:2
*
Custom (U): Acceleration Adjustment
To set acceleration level. (1: Soft acceleration - 8:
Powerful acceleration)
6 1: Soft - 8: Powerful
Initial Value
L:4, M:6, H:6, U:6
Soft-Start Property To adjust shock and speed levels at starting vehicle. 1 1 - 3
Acceleration Shock Level:
1: Big 2: Medium 3: Small
Accelerator Rate Property To adjust speed levels in halfway acceleration. 2 1 - 3 1: Fast, 2: Slightly slow 3: Slow
Plugging Regeneration Adjustment
To adjust regenerative braking when switching
directional F/R switches. 60
(%)
0 - 100
(%)
0: Invalid 100: Powerful
Brake Regeneration Adjustment
To adjust regenerative braking when stepping on
brake pedal. 90
(%)
0 - 100
(%)
0: Invalid 100: Powerful
Accelerator Neutral Regeneration ON/OFF
To set valid or invalid adjustment of regenerative
braking (acceleration neutral)
1 0: OFF 1: ON
Accelerator Neutral Regeneration Adjust.
To adjust regenerative braking when releasing
acceleration pedal from depressed position. 30
(%)
0 - 100
(%)
0: Invalid 100: Powerful
Travel Speed Limit (Tortoise) ON/OFF
To set travel speed limit freely by a supervisor of your
customer.
0 0: Invalid 1: Valid Available to set on meter panel
Travel Speed Limit (Tortoise)
To set the maximum speed limit when tortoise travel
speed is valid. 15.0
(km/h)
5.0 - 17.0 (km/h) Available to set with every 0.1km/h on PC.
Travel Speed Limit (Tortoise) Upper Limit
To set upper limit of tortoise ravel speed limit range. If
max travel speed is set from 17.0 km/h to 10 km/h, its
upper limit range is 5.0 - 10.0 km/h.
17.0
(km/h)
5.0 - 17.0 (km/h) Upper limit must be adjustable by operator
Travel Speed Limit With High Lift Mast
To set max travel speed of vehicle equipped with
high lift mast. If the setting is lower than others, it
should be the lowest even with travel speed of
16.2km/h and tortoise of 15.0km/h.
8.0
(km/h)
3.0 - 15.0 (km/h)
Travel speed limit in an OFF state of high lift
switch
Automatic Power Off
To set automatic shutdown of power supply when
there is no traveling or materials handling for 15
minutes.
1: Valid 0: Invalid 1: Valid
Travel Speed Limit , Supervisor
To set the max. travel speed limit that is valid when it
is lower than tortoise speed. 16.2
(km/h)
1.0 - 18.0 (km/h)
(Recommended upper
limit: 16.2 )
The max speed depends upon truck
capacity.
Slope Regeneration ON/OFF
To set very slow speed when driving down the slope
being controlled at 1 to 2 km/h when F/R switch is
turned ON.
1 0:OFF 1:ON