Komatsu 37BF50111, Руководство по эксплуатации и техническому обслуживанию

Страница: 230 / 244

HAND & FOOT CONTROL SYSTEM
228
6.5.1.1 TRAVEL AND STEERING CONTROL LEVERS
WARNING
q
Before carrying out any manoeuvre with the levers, the operator must be seated in driving position with
fastened safety belt and lowered safety bars; before any manoeuvre it is important to take all the precau-
tions indicated in "6.5.2 HOW TO MOVE THE MACHINE (HAND & FOOT CONTROL SYSTEM)".
q
Before moving the machine, make sure that the parking brake is released.
q
When travelling on roads, always inhibit the equipment control (see "3.3.5 pos. 8 - EQUIPMENT CON-
TROL LOCKING LEVER (IF INSTALLED)").
q
When travelling on roads, always make sure that all safety locks are engaged.
q
Before leaving the operator seat, stop the engine only after lowering the equipment to the ground and
locking the controls (safety bars lifted in vertical position).
q
Non-compliance with these rules may lead to serious accidents.
The travel control levers (1) and (2) are positioned on the Op-
erator's left and right side, respectively, and they control the
forward and reverse travel of the machine according to the
movements shown in the diagram.
IMPORTANT
q
To move the machine forward or in reverse, shift the le-
vers (1) and (2) at the same time and in the same direc-
tion.
q
For further details on the use of the levers, see pos.
6.5.2 HOW TO MOVE THE MACHINE (HAND & FOOT
CONTROL SYSTEM)"
N - Neutral
A - Forward
B - Reverse
1
RKAB1430
3
2
RKAB1440
RKA10420
N
A A
B B
N