Komatsu 37BF50111, Руководство по эксплуатации и техническому обслуживанию

Страница: 228 / 244

CHANGING THE OPERATING PATTERN
226
6.4.1 HOW TO CHANGE THE OPERAT-
ING PATTERN
After stopping the machine on a firm and level surface, lower
the equipment to the ground, stop the engine and lock the con-
trols by lifting the safety bars in vertical position.
Open the engine hood and proceed as follows:
1 - Loosen the safety screw (3) that holds the selection lever
(2) in position.
Use a 13 mm hexagon wrench.
2 - Select the desired operating pattern by rotating the lever
(2) to position " A " for the ISO PATTERN or to position " B "
for the OPTION PATTERN.
3 - Secure the lever in the selected position with the safety
screw (3).
IMPORTANT
q
Before moving the machine, the operator must make su-
re that the selected operating pattern corresponds to
the one desired.
The control panels (4) positioned at the sides of the cen-
tral dashboard are backlit.
q
The lighting of the plates is useful for the operator to
identify the type of operating system selected. (ISO PAT-
TERN or OPTION PATTERN control system).
RKAB1410
3
4
RKAB1420
4
RKAB1400
B
2
RKAB1390
A
2