Komatsu Utility PC26MR-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 94 / 252

INSTRUMENTS AND CONTROLS
92 WEAM009500
3.2.9 TILTING THE CAB FLOOR
WARNING
q
Always keep to the warnings when tilting or closing the cab floor. Any operation carried out incorrectly
may cause serious injury. If possible, this operation should be carried out by two persons.
q
Do not tilt or close the cab floor on slopes or if there is a strong wind.
q
Do not get too near the cab floor tilting or closing area and do not enter the cab when the cab floor is tilt-
ed.
q
Do not start the engine when the cab floor is tilted.
q
If there is something wrong in the locking function when the cab floor is tilted, interrupt work and have
the necessary repairs carried out by your Komatsu Dealer.
q
Do not remove the canopy. The cab floor may tilt suddenly.
q
Do not remove the fastening screws (1) of the cab floor, since this may tilt suddenly.
q
After lifting the platform, always attach the safety stop.
q
Do not carry out any operation on the machine without having first attach the safety stop.
Tilting the cab floor
1. Lower the blade.
2. Extend the bucket and arm cylinders completely, then lower
the boom slowly.
3. Shift the safety lever (1) to the “locked” position (L), then stop
the engine.
NOTE
q
On machines with cab, there is a single safety lever located to
the left of the Operator.
RKA23820