Komatsu Utility F50003, Руководство по эксплуатации и техническому обслуживанию

Страница: 157 / 284

LONG PERIODS OF INACTIVITY
155
NOTE
q
This preliminary operations must be carried out when the machine is going to remain unused for approximately 1
month; if the period of inactivity is expected to be longer, see also "3.14.2 PREPARING THE ENGINE FOR A
LONG PERIOD OF INACTIVITY".
If the machine is going to remain unused for a long period, to keep its components in good conditions it is advisa-
ble to store it in a sheltered place and to take the following measures:
1 - Clean the inside and the outside of the machine completely and very carefully, retouching any scratch on the
paintwork in order to avoid oxidation.
2 - Drain and change all the fluids of the hydraulic circuits and the lubricants (axles, reduction gears, converter),
following the indications given in the maintenance instructions.
3 - Change all the filtering elements (air filter, engine oil filter, hydraulic circuit filters, fuel filter).
4 - To prevent the deformation of the tyre sidewalls, insert supports or blocks under the axles, to nullify the weight
of the machine.
5 - Grease the exposed rods of the hydraulic cylinders and the equipment joints.
6 - Shift the machine controls to the neutral position and engage the safety locks.
7 - Seal the end of the exhaust pipe and the engine breather outlets.
8 - Refuel completely.
9 - Remove the battery, check the electrolyte level and make sure that the battery is charged.
Place the battery in a room with suitable temperature and recharge it periodically.
10 - Lock the cab doors, the filler cap and the engine hood.
11 - Seal the filler cap.