Kolver CBS 880, Руководство пользователя

Страница: 3 / 6

Vers. 190416 3
FRONT PANEL:

PR1÷PR8 led for each single program (socket):
- If on, it indicates the program in use.
- If flashing, it indicates the program to be selected (sequence mode and ext box enabled )

STOP MOTOR led: if on it indicates the motor is not enabled.
ESC-OK-RESET buttons are enabled through line 4 in the option menu (OK-ESC) by choosing one of the
following options:
INT = Only the buttons on the front panel of the control unit are operational
EXT = Only the buttons of the socket tray are operational (for the below mentioned
options)
INT- EXT = Both the socket tray and control unit buttons are operational.

RESET button:
It resets the program or sequence (line 5 in the option menu)
- PR = it resets one single program.
- SEQ = it resets the whole sequence (enabled only if the sequence mode is on).

ESC button:
Enabled according to the program (line 17 in the program menu)
- If ON = the ESC button must be pressed in order to reset the error signal.
- If OFF = the error is automatically reset.

OK button:
Enabled according to line 16 in the program menu.
PROGRAM:
- If ON = the program automatically resets.
- If OFF = the button must be pressed at the end of the program.
SEQUENCE: (Line 5 in the program menu).
- If ON = the sequence automatically resets.
- If OFF = the OK button must be pressed at the end of the sequence.