Kolver CBS 880, Руководство пользователя

Страница: 2 / 6

Vers. 190416 2
CONNECTION:
The CBS 880 bit/socket tray is to be used with the EDU 2AE/TOP and EDU 2AE/TOP/TA control units: it
allows to select the desired program by using one of the external bits or sockets. The bit/socket tray is
supplied with one standard M-F 25 pin cable (1,8 m long, code 880021).
HOW TO MODIFY THE BIT/SOCKET SEATS:
The bit/socket tray comes standard with 3mm diameter bit/socket
seats
, but it’s possib le to modify them (up to 24mm).
To modify the diameter:
1- Loosen the two screws of the seat you’d like to modify
(position 1 of the exploded view)
2- Remove the seat (position 2 of the exploded view)
3- Widen the seat according to the desired dimension
4- Place the seat back to its place and tighten the two screws
DISABLING SOME OF THE BIT/SOCKET SEATS:
If you don’t find it necessary to use all of the seats, you can disable the non-used ones through a “ DIP-
switch” ( see picture below) placed on the internal board. In order to do so, remove the screws and bottom
panel (position 8 and 9 of the exploded view). On the DIP-switch, ON indicates the seat is enabled, numbers
correspond to programs PR1 to PR8.