background image

Vers. 280519

14

GUARANTEE

1. This KOLVER product is guaranteed against defective workmanship or materials, for a maximum

period  of  12  months  following  the  date  of  purchase  from  KOLVER, provided  that  its  usage  is
limited  to  single  shift  operation  throughout  that  period.  If  the  usage  rate  exceeds  of  single  shift
operation, the guarantee period shall be reduced on a prorata basis.

2. If, during the guarantee period, the product appears to be defective in workmanship or materials, it

should  be  returned  to  KOLVER  or  its  distributors,  transport  prepaied,  together  with  a  short
description of the alleged defect. KOLVER shall, at its sole discretion, arrange to repair or replace
free of charge such items.

3. This guarantee does not cover repair or replacement required as a consequence of products which

have been abused, misused or modified, or which have been repaired using not original KOLVER
spare parts or by not authorized service personnel.

4. KOLVER accepts no claim for labour or other expenditure made upon defective products.
5. Any  direct, incidental or consequential  damages  whatsoever  arising  from  any  defect are  expressly

excluded.

6. This  guarantee  replaces  all  other  guarantees,  or  conditions,  expressed or  implied,  regarding  the

quality, the marketability or the fitness for any particular purpose.

7. No one, whether an agent, servant or employee of KOLVER, is authorized to add to or modify the

terms  of  this  limited  guarantee  in  any  way.  However  it’s  possible

to  extend  the  warranty  with  an

extra cost. Further information at [email protected].

Содержание 032000/FR















Отзывы: