Instr 26-2000
Rev 01 2020-09
Page 5 of 12
INSTALLATION INSTRUCTIONS
VEHICLE PREPARATION
GENERAL
1. Park vehicle on a flat surface.
2. Shift vehicle transmission to NEUTRAL and set
parking brake.
3. Turn key to
OFF
position and remove key from
vehicle.
4. Remove and keep one left side and one right side
bumper bolt and nut.
5. Remove and keep three bottom bumper bolts.
Remove and set aside bumper.
6. Remove and set aside seat.
7. Disconnect battery as shown in Owner’s Manual.
ACCESSORY INSTALLATION
WINCH INSTALLATION
1. Make sure wire routing and connections are as
shown and make necessary adjustments.
2. Put red and black cables up through frame
opening and over front gear case along the
parking brake cable bundle.
3. Attach power cables to parking brake cable /
transmission shifting cable bundle with one cable
tie
i
.
