5
© 2019 Kolpin Outdoors Inc.
REV 06
Mount Installation:
1.
Shift vehicle transmission into
NUETRAL or apply the vehicle
PARKING BRAKE. Turn ignition key to
OFF position and remove from ignition
switch. Disconnect black negative (
-
)
cable from battery.
2.
Carefully slide the winch mount plate
(item #1) up behind headlights of ATV.
Set the mount plate on the two main
frame tubes as shown. Secure and
fasten the mount plate to frame using
four u
-
bolts (item #3) and locknuts (item
#4). (See illustration 1
-
1).
3.
Attach the roller fairlead mount plate
(item #2) to the vertical front bumper
tubes, just above the front brush guard
with two u
-
bolts (item #4). Fasten u
-
bolt
threads with flat washer (item #5) and locknuts (item #4) as
shown. (See illustration 1
-
2).
4.
Using the hardware supplied with the winch kit, mount the winch
assembly onto the winch mount plate (item #1). The roller
fairlead adapter plate supplied with the winch kit will not be used
in this application.
5.
Tighten M8 fasteners to specification.
6.
Feed the winch cable end thru the mount
plate (item #2) and then thru the roller fairlead
(supplied with winch kit). Using fasteners
supplied with winch kit, attach the roller to the
mount plate as shown. (See illustration 1
-
2).
7.
Tighten M8 fasteners to specification.
8.
Connect the hook to cable or rope by using
hardware included in winch kit.
Winch Wiring and Connections:
9.
Using the winch kit instructions, route and
connect the electrical cables and components
for the winch system.
10.
Secure all harnesses using cable ties (provided with winch kit) to
prevent contact with hot components, sharp edges or moving
parts.
11.
Reconnect black negative (
-
) cable to battery.
Ill. 1
-
1
Ill. 1
-
2
Main Frame
Tube
Supplied
with winch
Front Bumper
Tube
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
