Kollmorgen AKI-CDA-MOD-10T, Руководство по установке

Страница: 15 / 28

AKI-CDA-MOD-10T | CHEMICAL RESISTANCE
5.2 Touch Screen and Overlay
5.2.1 Auto fl ex EBA 180L
Auto fl ex EBA 180L covers the overlay surrounding the screen.
Solvent Resistance
Auto fl ex EBA 180L withstands exposure of more than 24 hours duration under DIN 42 115 Part 2 to
the following chemicals without visible change:
Ajax / Vim in solution Downy / Lenor
(1)
Phosphoric acid (<30%)
Alkalicarbonate solution (1) Ethanol Potassium ferricyanide
Ammonia (<40%) (1) Glycerine Potassium hydroxide (<30%)
Acetic acid (<50%) Glycol Pure Turpentine
Ariel powder in solution
(1)
Gumption (1) SBP 60/95 (1)
Bleach
(1)
Hydrochloric acid (<36%) Sulfuric acid (<10%)
Castor oil Linseed oil Tomato ketchup
Caustic soda (<40%) (1) Methanol Trichloroacetic acid (<50%)
Cutting oil Nitric acid (<10%) White Spirit
Cyclohexanol Paraf fi n oil Windex
(1)
Diacetone alcohol Persil powder in solution
(1)
Wisk
Diesel Petroleum spirit
(1)
Acetonitrile
(1) Extremely faint glossing of the texture was noted.
Auto fl ex EBA 180L withstands DIN 42 115 Part 2 exposure of up to 1 hour duration to glacial acetic
acid without visible change.
Auto
fl ex EBA 180L is not resistant to high pressure steam at over 100 °C or the following chemicals:
Concentrated mineral acids Benzyl alcohol
Concentrated caustic solution Methylene chloride
5.2.2 Touch Screen Surface
The touch screen surface on the operator panel withstands exposure to the following solvents without
visible change:
Solvents Time
Acetone 10 minutes
Isopropanol 10 minutes
Toluene 5 hours
ky
Kollmorgen | October 2014
15