K3 IMU
- 25 -
AVR, RMC and so on. It is configured in Data Flow Config page.
SIC Observation Data:
This is the user-defined format observation data from KOLIDA.
OpenSIC Observation Data:
This is the open version of KOLIDA user-defined format
observation data for secondary development.
TCP/IP Config
This is used to configured the raw data or navigation data to be uploaded or transferred to a server.
And there are Caster and Server working mode for this performance.
Caster:
If this working mode is selected, KOLIDA K3 IMU will be a client to upload the data to
a specify server if it connects to the internet by WIFI. Input the specified IP and port for server,
and the data format what is uploaded. Then users are able to see the uploaded data on server.
Server:
KOLIDA K3 IMU will upload the data onto internet by the static WIFI if server is
selected, then users are able to obtain its dynamic data by accessing to K3 IMU through the IP
from receiver.
NTRIP Config
This is used to configure the NTRIP performance while receiver is going to connect to internet.
KOLIDA K3 IMU supports complete NTRIP performance including NTRIP Client, NTRIP
