Kolibri Automatic Bill Counter Скачать руководство пользователя страница 4

 

1.1 

About the Kolibri Automatic Bill Counter

 

Thank you for choosing the Kolibri Automatic Bill Counter.
The Kolibri Automatic Bill Counter is a cash processing machine that is sophisticated, 

but simple to operate. It saves time and reduces counting errors by swiftly and precisely 

counting stacks of bills at the speed of 1500 bills per minute. The Kolibri Automatic Bill 

Counter also comes with many built-in features and reliable counterfeit detection while 

maintaining high level performance.

1.2 

Important Safety Notes

 

When using this product, basic safety precautions should always be followed, including 

the following: 

• Do not use this product in areas where it may be exposed to water or any other

   liquids. 

• Unplug this product from the wall outlet before cleaning. Use a damp cloth or

   air duster to clean the unit. 

• To avoid the risk of electrical shock, do not disassemble this unit. Disassembling

   will expose you to dangerous voltages and other safety risks. Incorrect

   reassembly may cause electrical shock when the unit is subsequently used. 

• Only use this product with the power cord supplied with it. Plug the power

   cord into a properly grounded wall outlet. Do not remove the grounding pin

   from the power cord. Failure to properly ground the unit can result in severe

   injury or fire. 

• Make sure the device is placed on a flat surface. Do not operate the unit in

   areas with high temperature, humidity or smoke as these conditions may

   impede performance. 

• This product is designed for indoor use in a well-ventilated environment. Keep

   the unit away from direct sunlight and strong magnetic fields which may

   interfere with the counterfeit detection sensors. 

• When not using the unit for an extended period of time, disconnect the power

   cord from the wall outlet.

INTRODUCTION

1.

1

Содержание Automatic Bill Counter





























Отзывы: