Kolibri Automatic Bill Counter, Руководство пользователя

Страница: 24 / 28

21
PROBLEM DESCRIPTION
Machine does not turn on.
Machine failes to detect
counterfeit notes.
Bills are jammed.
CAUSE/ACTION
Ensure the power cord is connected properly. Check
the fuse in the fuse compartment and replace it if
necessary. Contact Kolibri’s technical service center
if the issue persists.
1. Bills were incorrectly inserted into the hopper.
2. Turn off the machine and turn it back on.
3. The feed gap is too wide. This may happen when
brand new notes are counted as their thickness
differs greatly from used notes to which the machine’s
gap is adjusted for by default. Narrow the gap slightly
by turning the feed gap adjuster (refer to section 1.5,
rear and front view) counterclockwise by one turn at
a time and try counting again. Repeat the procedure
until a suitable gap width is reached. If the resistance
against the bill feels too strong, loosen the gap by
turning the screw clockwise.
Turn off the machine. Remove any jammed bills.
Look for any foreign objects inside the unit (paper
clips, rubber bands, etc.). Remove foreign objects,
if any. Recount.
Other Possible Errors: