Koldfront WAC12002WCO, Руководство пользователя, Страница: 18 / 25

13
Using the Remote Control
ON/OFF button - Select
to turn unit off and on.
TEMP UP button - Push this
button to increase the
temperature setting in
1°C/1°F increments up to
30°C/86°F.
TIMER button - Push this
button to activate the
“Auto Start” or “Auto
Stop” program
ONE TOUCH button - When
pushed, the system will
automatically shift to COOL
operation with auto fan
speed. The temperature
setting will be 26°C/80°F.
(Timer setting program will be
cancelled.)
MODE button - Press this
button to select desired
operation mode from AUTO,
COOL, DRY, and FAN.
TEMP DOWN button - Push
this button to decrease the
temperature setting in 1°C/1°F
increments to 17°C/62°F.
FAN SPEED button - Use to
select the fan speed in four
steps: AUTO, LOW, MED,
and HIGH.
SLEEP button - Press this
button to activate the Sleep
Mode. This function is
available in COOL or AUTO
modes only.
Additional Notes on Remote Control Operation:

The remote control has an operating range of 16 ft from the appliance.

The remote signal receiver/sensor is located on the control panel of the air conditioner.

Reception of signal commands is confirmed by an audible beep.

Direct sunlight can interfere with the infrared signal.

To replace batteries, remove the back cover by pressing where indicated and sliding off the
battery cover.