13
Operating the Remote continued
Fan Only mode is used to circulate the air in your room. No
temperature setting is needed.
To operate the unit in Fan Only mode:
1) Make sure the power cord is plugged into a power outlet.
2) Press the Power button on the remote.
3) Press the Mode button until the Mode indicator light turns green.
4) Press the Speed button to select the fan speed. You can choose
between High, Medium and Low. The LED indicator next to the
speed will light up.
The Speed button is used to change the fan speed while in Cooling
and Fan Only modes.
Press the Speed button to select the fan speed.
The timer can be used to either turn the unit on or off after a
number of elapsed hours. The timer is adjustable between 1-24
hours in one hour increments.
How to set the unit to automatically turn on
:
1) Press the Timer button on the remote control while the unit is
powered off.
2) Use the Up and Down buttons on the remote to set the time
(displayed in hours) you want to pass before the unit turns on. After
the selected time passes, the unit will automatically turn on.
How to set the unit to automatically turn off
:
1) Press the Timer button on the remote control while the unit is
powered on. The Timer indicator LED will light up
2) Use the Up and Down buttons on the remote to set the time
(displayed in hours). The unit will automatically turn off after the
selected time elapses.
To set the temperature in cooling mode, use the Up and Down
buttons on the remote. The temperature range is adjustable.
Maintenance
Clean the air conditioner and filters regularly to maximize
performance and efficiency, and prolong the unit’s life. Be sure to
always unplug the air conditioner from the power outlet before
cleaning.
Fan Only Mode
Speed
Timer
Setting the Temperature
NOTE:
Fan Only mode does
not require that the exhaust
hose be attached.
NOTE:
To cancel the timer,
press the Cancel button or
Power button.