13
Preparation for Storage
If you are not going to be using the unit for an extended period of time, follow the instructions
below before storing your unit:
1.
Drain all the water from the unit’s reservoir.
2. Operate the unit in fan mode for a few hours to thoroughly dry any moisture left on the coils
inside the unit.
3. Power off the unit. Then clean and replace the pre-filter.
4. Unplug and carefully wind the power cord.
5. Remove the exhaust hose and duct connectors and keep them in a safe place.
6. Remove the batteries from the remote control.
7. Always store the unit in a dry location in the upright position.
Error Codes
If the display shows either of the following error codes contact customer service.
Display Code Error
E1
Ambient Temperature Sensor Error
E2
Evaporator Coil Sensor Error
Caution: Do not drink water drained from the unit.
