KoldFront Evaporative Air Cooler
4
Operating Instructions
After connecting the air cooler’s power plug to an outlet, the unit will
be ready to be operated.
Control Panel Operation
To power the unit on, switch the Timer Dial to the “ON” position.
Press on the LOW, MED, or HI buttons to set the fan speed.
To turn the unit off, press the OFF button or turn the dial to the
“OFF” position.
The Cool button is used to turn the water pump on or off. The unit
pumps water from its water tank over the evaporative wick. As air is
drawn past this water, the endothermic effects of evaporation result
in cooling.
Caution: Never run the unit in cool mode if the water tank is
empty. This may cause damage to your water pump.
The Swing button is used to turn the oscillation function on or off.
The louvers will automatically direct airflow from left to right when
the Swing button is pressed.
The timer can be used to turn the unit off automatically. The timer
is adjustable up to 2 hours. To use the timer, simply turn the dial to
the 30, 60, 90 or 120 marks. The unit will run for the amount of time
that was set and then it will shut off.
Press the LOW, MED, or HI buttons to adjust the fan speed.
Louver Control
Press the SWING button to start the vertical louvers moving from
side to side. To stop the louvers, press the SWING button again.
You can change the air direction up or down by manually adjusting
the horizontal louvers.
Notes: Do not allow the air intake to be near walls or curtains,
otherwise the wind and cooling effect may be reduced because of
blocked air flow. Do not expose the unit to direct sunlight.
Power
Cool
Swing
Timer
Fan Speed Buttons